Brake Option Morse Forklift Karrier Lifts and Dumps Drums 800 lbs
- Description
- You May Also Need
- Q&As
- PDFs
- Reviews
Description
Brake Option Morse Forklift Karrier Lifts and Dumps Drums 800 lbs
MORSE® Forklift Karrier for steel drums slides quickly and easily onto forks without the use of tools, requiring no modifications or connections to the lift truck. Fork openings are 25 inches apart, and forks up to 2 1/2 inch x 6 1/2 inch can be used. The Forklift Karrier has an 800 pound capacity or a half drum capacity of 500 pounds. A half-full drum is unbalanced and bottom-heavy, so when tilted, the load shifts differently than a full drum.
Drum tilt is controlled by a 30:1 gear and sprocket drive. The 20-foot pull chain has a 10-foot drop of chain that allows the operator to turn the drum from the fork truck's driver seat.
The MORcinchTM drum handling system on this Forklift Karrier automatically adjusts for 22 inch to 23 1/2 inch diameter drums with a sliding idler and durable stress relief weld joints. It has a flexible cinch chain cover that improves grip and protects the sidewall of your drum.
Lift, move, and control the pouring of a heavy drum from the comfort of your forklift seat.
All operations are managed from the driver's seat. 30:1 gear ratio, 800 lb capacity, 500 lb half drum capacity Fits steel, plastic, and fiber drums up to 55 gallons. Drains and lifts
Options Drum Diameter Adapters are available for handling smaller drums. Bracket (SKU 84556-P) or Rim Clamp (SKU 84560-P) for handling plastic and fiber drums, as well as MORStopTM Tilt-Brake, which automatically stops and holds the drum's tilt angle.
Please keep in mind that not every style and size option will fit every MORSE unit. The manual tilt mechanism on this unit can be replaced with a Hand Crank (X02-285) or a Hand Wheel (X03-285).
Special order Spark Resistant Models are available.
Drum dumpers transport, lift, rotate 360 degrees
Convenient operation from the operator's seat
Drain drums up to 2500 lb.
Model 8285A has a pull chain manual drum tilt control to rotate the drum 360 deg forward and back to dispense into a vat, hopper, or mixer.
Drum Handling System MORCINCHTM Drum Stand Automatically adjusts for drum diameters ranging from 22" to 23.5" (56 to 59.7 cm). Install the appropriate MORCINCHTM Kit to handle a plastic or fiber drum. Insert the appropriate Diameter Adapter for each smaller drum. To hold the drum tilt angle until the operator turns it, we recommend the MORStopTM Tilt-Brake Option. All Lift and Pour Drum Forklift Attachments...
SAFETY-AWARE Forklift Drum Handlers DANGEROUS bare fork drum handling should be avoided. Lift, move, and pour a drum with your forklift using Morse Forklift-Karriers. Forklift drum attachments are simple to attach to forks. 25" (63.5 cm) between forks is required.
Features:
MORSE® Forklift Karrier for steel drums slides quickly and easily onto forks without the use of tools, requiring no modifications or connections to the lift truck. Fork openings are 25 inches apart, and forks up to 2 1/2 inch x 6 1/2 inch can be used. The Forklift Karrier has an 800 pound capacity or a half drum capacity of 500 pounds. A half-full drum is unbalanced and bottom-heavy, so when tilted, the load shifts differently than a full drum.
Drum tilt is controlled by a 30:1 gear and sprocket drive. The 20-foot pull chain has a 10-foot drop of chain that allows the operator to turn the drum from the fork truck's driver seat.
The MORcinchTM drum handling system on this Forklift Karrier automatically adjusts for 22 inch to 23 1/2 inch diameter drums with a sliding idler and durable stress relief weld joints. It has a flexible cinch chain cover that improves grip and protects the sidewall of your drum.
Lift, move, and control the pouring of a heavy drum from the comfort of your forklift seat.
All operations are managed from the driver's seat. 30:1 gear ratio, 800 lb capacity, 500 lb half drum capacity Fits steel, plastic, and fiber drums up to 55 gallons. Drains and lifts
Options Drum Diameter Adapters are available for handling smaller drums. Bracket (SKU 84556-P) or Rim Clamp (SKU 84560-P) for handling plastic and fiber drums, as well as MORStopTM Tilt-Brake, which automatically stops and holds the drum's tilt angle.
Please keep in mind that not every style and size option will fit every MORSE unit. The manual tilt mechanism on this unit can be replaced with a Hand Crank (X02-285) or a Hand Wheel (X03-285).
Special order Spark Resistant Models are available.
Model 8285A has a pull chain manual drum tilt control to rotate the drum 360 deg forward and back to dispense into a vat, hopper, or mixer.
Drum Handling System MORCINCHTM Drum Stand Automatically adjusts for drum diameters ranging from 22" to 23.5" (56 to 59.7 cm). Install the appropriate MORCINCHTM Kit to handle a plastic or fiber drum. Insert the appropriate Diameter Adapter for each smaller drum. To hold the drum tilt angle until the operator turns it, we recommend the MORStopTM Tilt-Brake Option. All Lift and Pour Drum Forklift Attachments...
SAFETY-AWARE Forklift Drum Handlers DANGEROUS bare fork drum handling should be avoided. Lift, move, and pour a drum with your forklift using Morse Forklift-Karriers. Forklift drum attachments are simple to attach to forks. 25" (63.5 cm) between forks is required.
Features:
- Cap. Full Drum: 800 lbs.
- Cap. Half Drum: 500 lbs.
- Fits Drum: 55 gal. steel
- Gear Ratio: 30:1
- Type.: Manual
- Weight: 149 lbs.
You May Also Need
Q & A's
Questions & Answers about Brake Option Morse Forklift Karrier Lifts and Dumps Drums 800 lbs
Ask a question about Brake Option Morse Forklift Karrier Lifts and Dumps Drums 800 lbs. Click here
Industry Terms
