Cleaning and Storage Tube For Bung-Entering Drum Mixers
- Description
- You May Also Need
- Q&As
- Reviews
Description
Special combination of propeller blades provides thorough mixing of extremely viscous liquids. Triple propeller shaft enters through and screws into 2" NPS bung opening.
NOTE: No cord or plug supplied on electric motors.. Must be wired according to local electrical codes and standards.
H-Series Mixers handle viscosities up to 8,000 cps, have three 2-blade props.
HGS-series mixers handle viscosities up to 32,000 cps have three two-blade fixed props and one 3 3/4 " folding prop, gear drive 430 rpm motor.
Motor Types: TEFC motor (Totally Enclosed Fan Cooled), 1725 rpm, single-phase 115/230 volt.
Explosion proof motor (Class1, Group D), 1725 rpm, single-phase 115/230 volt.
Air Motors (1/4 hp with 10 cfm @ 20 psi, 1/2 hp with 20 cfm @ 40 psi) and (3/4 hp with 30 cfm @ 25 psi, 1hp with 40 cfm @ 35 psi). Air motors deliver 0-2000 RPM.
Features:
Max.
Viscosity (CPS).:
Motor Description: Cleaning and storage tube
Wt. (lbs.): 4
-
DESCRIPTION
- Now you can quickly and safely soak and clean bung entering industrial equipment, pump tubes, bung mixers, dip tubes and other bung process drum equipment more safely, thoroughly and quickly.
- Minimize solvent use and operator or environmental exposure to messy or hazardous material splashing.
- Tube is aluminum and includes plated steel wall brackets.
- Helps reduce cross contamination between batch changes
- Minimizes dangerous fume exposure during clean up
- Helps prevent liquid spillage and solvent waste during clean up
- Equipment diameter: 1.80 inches
- Internal tube diameter: 1.85 inches
- Overall tube length: 35 inches
- Tube solvent capacity Approximately 1.5 quarts
SPECS - Description: Cleaning and storage tube
- Wt.: 4 lb
- Call Our BayTec Customer Service Department At 800.560.2334 For More Information.
- Safe Shopping Guarantee
You May Also Need
Q & A's
Questions & Answers about Cleaning and Storage Tube For Bung-Entering Drum Mixers
