Manual Tilt/Power Lift Drum Handler Air,72"

Manual Tilt/Power Lift Models* - Morse Hydraulic Lift Karrier™ Drum Handler with Power Options - 8400A72-124

The Manual Tilt/Power Lift Drum Handler Air,72", is the perfect solution for increasing safety and productivity. This handy device eliminates manual effort to lift and/or tilt the drum, allowing precise and effortless control of lift height and draining angle. It features separate control valves for lifting and rotating and electric models with hydraulic pumps driven by a 110 VAC, 1-phase TEFC motor and supplied with a 3-wire cord, plug, and switch. For added flexibility, battery models are also available with vane-type air motors. Optional filters, regulators, and lubricators are available for added convenience and enhanced performance. With the Manual Tilt/Power Lift Drum Handler Air,72", you can easily and safely lift and tilt heavy drums.

• The drum handler lifts and/or tilts drums.
• Eliminates manual effort
• Chain Wheel Tilt
• Dispensing Ht.: 72"
• Capacity: 800 lb
• It fits 55-gallon steel drums

Power Lift Karriers increase safety and productivity. Eliminate manual effort to lift and/or tilt the drum. Move the control valve handle to raise, lower, or hold the drum in position. Power Lift and Tilt Karriers allow precise and effortless control of lift height and draining angle. They are equipped with separate control valves for lifting and rotating. Electric Models have hydraulic pumps driven by 110 VAC, 1 phase TEFC motor and supplied with a 3-wire cord, plug and switch. Air Models have vane-type air motors. (Optional filter, regulator, and lubricator are available.) Battery Models have 12 volts DC pump motors. They are supplied with deep-cycle batteries and chargers.

Features:
1. Dispensing Ht. (in.): 72
2. Power Source: Air
3. Wt. (lbs.): 338
4. Drum handler lifts and tilts drums
5. Two 8" Polyolefin wheels and two 4" Swivel casters
6. Chain Wheel Tilt which allows the drum to rotate 360° either direction
7. MORCinch™ drum handling system designed to adjust for 22" to 23 1/2" diameter steel, plastic, or fiber
8. drums with an adapter