Get a Grip on Your Assembly Needs with MORSE Rim Clamp Kit

MORSE Rim Clamp Assembly Kits,

Prevent plastic drums from slipping through the drum saddle Install onto MORcinch or tube socket drum saddles

When handling a plastic drum secured in a MORSE drum saddle, a Bracket (84560B-P) or a Rim Clamp (84560-P) is required to

prevent the plastic drum from slipping out of the saddle.

Prevents RIMMED plastic or fiber drum from slipping length-ways

Grips Top Rim of drum

Adjusts for 30 to 55-gallon (114 to 210-liter) size drum

Install Top Rim Clamp on the side plate of the MORCINCH Drum Holder with two bolts

84560B-P Bracket is the best all-around choice. It is designed for use with rimless or rimmed plastic drums with diameters of 19" - 23.5" (30-55 gallons) and a height of 31" - 39". The 84560B-P is also recommended when handling fiber drums within the exact dimensions. All necessary hardware is included, along with installation instructions.

4560-P Rim Clamp may be preferred when handling plastic drums with a top rim and a diameter of 22" - 23.5" (55 gallons). All necessary hardware is included, along with installation instructions. Diameter Adapters are required for drums under 22" in diameter. Adapters 55/30-19 and 55/30-20.5 should be used in conjunction with the 84560B-P Bracket or 4560-P Rim Clamp. Note: 55/30-14.5, 55/30-16, and 55/30-17 include adjustable top and bottom bracket-style supports of a different design.

Features:
1. Description: Rim Clamp assembly kit
2. Weight: 11 lbs.
3. Prevents RIMMED plastic or fiber drum from slipping length-ways
4. Grips Top Rim of drum
5. Adjusts for 30 to 55-gallon (114 to 210-liter) size drum
6. Install Top Rim Clamp on the side plate of the MORCINCH Drum Holder with two bolts
7. MORCINCH Drum Holder has been a component of MANY Morse models since April 2009

The MORSE Rim Clamp Assembly Kit is specifically designed for part 4560B-P to ensure that your rimmed plastic or fiber drum stays firmly in place. The adjustable kit is compatible with drums ranging from 30 to 55 gallons (114 to 210 liters) in size and can be easily installed on the side plate of the MORCINCH Drum Holder using two bolts. The MORCINCH Drum Holder has been a component of many Morse models since April 2009, so you can trust that your drum is secure and held in place. Make sure your drum stays in place with the MORSE Rim Clamp Assembly Kit!