PUROGENE
By destroying existing bacterial colonies and preventing the developing on new ones, PUROGENE eliminates bad odor and bad taste to stored potable water supplies. PUROGENE water treatment for good and natural taste in drinking water, and secure the joy of good taste in coffee, tea, punch, and other drinks.
PUROGENE Works in all types of water systems: Cold water system hot water system Plastic Tanks Fiberglas tanks Metal Tanks
Destroys deadly microbes, bacteria, parasites and viruses in water. 1 oz. of Purogene per 30 gals makes the water safe to drink for an extended period of time.
3R PUROGENE PUTS THE 'FRESH' BACK INTO WATER
3R PUROGENE is a 2% solution of stabilized chlorine dioxide (contains no free chlorine). Chlorine dioxide has been recognizing safe for water treatment for more than 50 years. It is EPA approved, as are all of 3R ODOR-CON/PUROGENE SALES products. 3R ODOR-CON/PUROGENE SALES is working in cooperation with nature to keep you healthy and free of contaminants.
Before 3R PUROGENE, chemicals were used to purify drinking water (potable water); chemicals that took hours to work and left a bad after-taste. 3R PUROGENE makes water fresh and sweet the moment it enters the container, from a drinking glass to a plastic, metal, or fiberglass storage tank. 3R PUROGENE is non-toxic and biodegradable, presenting no harm to the environment or the user.
One ounce of 3R PUROGENE will purify thirty gallons of drinking water, as well as control the build-up of slime and odor-causing bacteria in any drinking water system.
Water treatment to control the build-up of slime and odor-causing bacteria and enhance the taste of stored drinking water. Drinking water should be treated at a rate of 1 fl oz of 3R PUROGENE per 30 gallons of drinking water. This treatment will provide fresh taste and odor control to drinking water. Treat each new addition of drinking water to the fresh water tank at the ratio of 1 fl oz of 3R PUROGENE per 30 gallons of drinking water. Treat as often as necessary to maintain fresh taste and odor control.
Disinfecting a large self-contained water system For every 400 gallons of water tank capacity, measure out and mix in a clean plastic or glass container 1 gallon of 3R PUROGENE. To this solution add 16 oz (2 cups) of Citric Acid Activator Crystals (DO NOT breathe the fumes) and let it stand for 5 minutes. Then pour the solution into the water tank and fill the tank with clean drinking water. Turn on the water pump and drain a cup of water from each of the faucets including hot water faucets if any. Then refill the tank with clean drinking water to replace all of the water and solution drained from each faucet. Let the disinfectant solution and full tank stand for 1 hour. After the hour drain the tank and all faucets including the water heater tank. Do not rinse. Fill the tank and water heater tank with fresh drinking water as per the water treatment described above. To maintain the tank, repeat this procedure as often as necessary.
3R PUROGENE PUTS THE 'FRESH' BACK INTO WATER
Containers: Water containers must be free of oil, detergent, ammonia, and organic contaminants. Do not use steel containers with exposed metal which will come in contact with the stored water. Plastic lined steel drums are fine.
Water: Water to be stored should be as low in mineral content as possible. Water should be bacteria free and free of organic materials. For storage of bacteria contaminated water, see Procedure for Contaminated Water below.
PROCEDURE FOR FRESHWATER
1. Fill storage container, about 1 gallon short of full, with water.
2. Into a mixing container add 1 ounce of 3R PUROGENE for every 15 gallons of storage water. Use glass, plastic, or stainless steel container.
3. Add 1 measuring teaspoon (rounded, not heaping nor level) of citric acid activator crystals per ounce of 3R PUROGENE into the mixing container. Two teaspoons for a 30-gallon drum, 3.5 teaspoons for a 55-gallon drum. Let it sit out of the sunlight for 5 minutes.
4. Pour the 3R PUROGENE/citric acid activator crystals mixture into the storage water container.
5. Finish filling the storage water container with water and then seal it airtight.
PROCEDURE FOR CONTAMINATED WATER
1. Fill storage container, about 1 gallon short of full, with water.
2. Into a mixing container add 1� ounces of 3R PUROGENE for every 15 gallons of storage water. Use glass, plastic, or stainless steel container.
3. Pour � of the mixing container of 3R PUROGENE into the storage water container.
4. Add 1 measuring teaspoon (rounded, not heaping nor level) of citric acid activator crystals per ounce of 3R PUROGENE as calculated in 2 above into the mixing container. Three teaspoons for 30-gallon drum, 5 teaspoons for 55-gallon drum. Let it sit out of the sunlight for 5 minutes.
5. Pour the 3R PUROGENE/citric acid activator crystals mixture into the storage water container.
6. Finish filling the storage water container with water and then seal it airtight.
YEARLY CHECK AND RETREAT
1. Open the storage water container and draw out one quart of stored water.
2. Check for clarity and odor. If water is cloudy or odor is objectionable, it is recommended to discard the water and start at the Procedure for Contaminated Water. Closely examine the integrity of the container seal before using it again for water storage.
3. If water quality is acceptable, follow the Procedure for Fresh Water.
4. Reseal the storage water container.
3R PUROGENE is a 2% solution of stabilized chlorine dioxide (contains no free chlorine). Chlorine dioxide has been recognized safe for water treatment for more than 50 years. 3R PUROGENE can bleach fabrics and wood. Review the precautions for handling on the 3R PUROGENE bottle.
CAUTION: 3R PUROGENE SHOULD BE STORED IN A COOL, DARK PLACE
PUROGENE Works in all types of water systems: Cold water system hot water system Plastic Tanks Fiberglas tanks Metal Tanks
Destroys deadly microbes, bacteria, parasites and viruses in water. 1 oz. of Purogene per 30 gals makes the water safe to drink for an extended period of time.
3R PUROGENE PUTS THE 'FRESH' BACK INTO WATER
3R PUROGENE is a 2% solution of stabilized chlorine dioxide (contains no free chlorine). Chlorine dioxide has been recognizing safe for water treatment for more than 50 years. It is EPA approved, as are all of 3R ODOR-CON/PUROGENE SALES products. 3R ODOR-CON/PUROGENE SALES is working in cooperation with nature to keep you healthy and free of contaminants.
Before 3R PUROGENE, chemicals were used to purify drinking water (potable water); chemicals that took hours to work and left a bad after-taste. 3R PUROGENE makes water fresh and sweet the moment it enters the container, from a drinking glass to a plastic, metal, or fiberglass storage tank. 3R PUROGENE is non-toxic and biodegradable, presenting no harm to the environment or the user.
One ounce of 3R PUROGENE will purify thirty gallons of drinking water, as well as control the build-up of slime and odor-causing bacteria in any drinking water system.
Water treatment to control the build-up of slime and odor-causing bacteria and enhance the taste of stored drinking water. Drinking water should be treated at a rate of 1 fl oz of 3R PUROGENE per 30 gallons of drinking water. This treatment will provide fresh taste and odor control to drinking water. Treat each new addition of drinking water to the fresh water tank at the ratio of 1 fl oz of 3R PUROGENE per 30 gallons of drinking water. Treat as often as necessary to maintain fresh taste and odor control.
Disinfecting a large self-contained water system For every 400 gallons of water tank capacity, measure out and mix in a clean plastic or glass container 1 gallon of 3R PUROGENE. To this solution add 16 oz (2 cups) of Citric Acid Activator Crystals (DO NOT breathe the fumes) and let it stand for 5 minutes. Then pour the solution into the water tank and fill the tank with clean drinking water. Turn on the water pump and drain a cup of water from each of the faucets including hot water faucets if any. Then refill the tank with clean drinking water to replace all of the water and solution drained from each faucet. Let the disinfectant solution and full tank stand for 1 hour. After the hour drain the tank and all faucets including the water heater tank. Do not rinse. Fill the tank and water heater tank with fresh drinking water as per the water treatment described above. To maintain the tank, repeat this procedure as often as necessary.
3R PUROGENE PUTS THE 'FRESH' BACK INTO WATER
Containers: Water containers must be free of oil, detergent, ammonia, and organic contaminants. Do not use steel containers with exposed metal which will come in contact with the stored water. Plastic lined steel drums are fine.
Water: Water to be stored should be as low in mineral content as possible. Water should be bacteria free and free of organic materials. For storage of bacteria contaminated water, see Procedure for Contaminated Water below.
PROCEDURE FOR FRESHWATER
1. Fill storage container, about 1 gallon short of full, with water.
2. Into a mixing container add 1 ounce of 3R PUROGENE for every 15 gallons of storage water. Use glass, plastic, or stainless steel container.
3. Add 1 measuring teaspoon (rounded, not heaping nor level) of citric acid activator crystals per ounce of 3R PUROGENE into the mixing container. Two teaspoons for a 30-gallon drum, 3.5 teaspoons for a 55-gallon drum. Let it sit out of the sunlight for 5 minutes.
4. Pour the 3R PUROGENE/citric acid activator crystals mixture into the storage water container.
5. Finish filling the storage water container with water and then seal it airtight.
PROCEDURE FOR CONTAMINATED WATER
1. Fill storage container, about 1 gallon short of full, with water.
2. Into a mixing container add 1� ounces of 3R PUROGENE for every 15 gallons of storage water. Use glass, plastic, or stainless steel container.
3. Pour � of the mixing container of 3R PUROGENE into the storage water container.
4. Add 1 measuring teaspoon (rounded, not heaping nor level) of citric acid activator crystals per ounce of 3R PUROGENE as calculated in 2 above into the mixing container. Three teaspoons for 30-gallon drum, 5 teaspoons for 55-gallon drum. Let it sit out of the sunlight for 5 minutes.
5. Pour the 3R PUROGENE/citric acid activator crystals mixture into the storage water container.
6. Finish filling the storage water container with water and then seal it airtight.
YEARLY CHECK AND RETREAT
1. Open the storage water container and draw out one quart of stored water.
2. Check for clarity and odor. If water is cloudy or odor is objectionable, it is recommended to discard the water and start at the Procedure for Contaminated Water. Closely examine the integrity of the container seal before using it again for water storage.
3. If water quality is acceptable, follow the Procedure for Fresh Water.
4. Reseal the storage water container.
3R PUROGENE is a 2% solution of stabilized chlorine dioxide (contains no free chlorine). Chlorine dioxide has been recognized safe for water treatment for more than 50 years. 3R PUROGENE can bleach fabrics and wood. Review the precautions for handling on the 3R PUROGENE bottle.
CAUTION: 3R PUROGENE SHOULD BE STORED IN A COOL, DARK PLACE
