Carbon Steel, Heat or Cool 55 Gallon Drums, 3
Zoom

Carbon Steel, Heat or Cool 55 Gallon Drums, 3

Item Number# 8M-55
$7,598.98
$8,256.99
(You Save 8%)
This item is currently OUT OF STOCK!

  • Description
  • You May Also Need
  • Q&As
  • PDFs
  • Reviews

Description

  • Ideal for use in hazardous areas
  • Use with steam, water, hot oil, heat transfer liquids or refigerant
  • Available in carbon steel or zinc metalized steel

    Heater/Cooler units have embossed channels for steam, hot or cold water, or refrigerant*. All welded 18/16 gauge carbon steel construction with smooth inner panel for efficient heat transfer. Features quick acting toggle clamp for easy installation and removal and an insulated handle for safe handling. A single section unit will heat a 55 gallon steel closed drum from 60 degrees F to 160 degrees F in 4 hours using 150 psig steam. 1/2" IPS (iron pipe size) female inlet and outlet pipe couplings. Multi-section units are supplied already piped together. Hinged-Back Style has a continuous hinge at the back of the unit for easy installation and removal. Slip-Over Style has a continuous jacket that is designed to slip over the top of a container. Expandable opening at one end has a toggle style clamp to secure the unit in place. Drum Cradle Style is available in carbon steel only. It has a heavy steel pipe frame and three half sections of heating/cooling channels. Cradle unit will heat a closed, properly ventilated 55 gallon steel drum of water from 60 degrees F to 160 degrees F in approximately 2 1/2 hous using 150 psig steam. The cradle unit is equipped with a 3/4" MPT (male pipe thread) inlet and outlet. Immersion Style is designed to come in contact with the liquid it is to heat or cool by placing it directly into a 55 gallon drum. 3/4" MPT connections standard on units without hoses. Maximum operating steam pressure without the use of hoses is 250 psig and with 3/4" I.D. x 42" steam hoses, 200 psig working pressure at 380 degrees. Not available in zinc metalized steel. Hoses, if included, are steam hoses made of rubber with wire braid reinforcement. Carbon Steel Models have a light coating of oil on the exterior surface to help prevent rust. Zinc Metalized Steel Models have an exterior zinc coating for more substantial rust prevention. Stainless Steel Models are made of stainless steel platecoil.

    Features:
    Container Size: 55 gal.
    Description: 3-sections
    Weight: 65 lbs.

    • The plate coil heater is designed for use with steam, hot water, hot oil, or high temperature heat transfer liquids. The Tranter Platecoil® is equally adaptable for cooling by using cold water or a refrigerant. This carbon steel plated coil heater is all welded 18/16 gauge carbon steel construction with smooth inner panel for efficient heat transfer. It has a light coating of oil on the exterior surface to help prevent rust. This warmer combines three external clamp on style units. Each unit is two plate coil panels hinged together for an expandable opening, and is secured in place with quick acting toggle clamps on the top and bottom unit. The units are combined into one assembly by means of welded-on tie bars and jumpers. The plate coil drum warmer units are 18/16 gauge carbon steel with a smooth inner panel for efficient heat transfer. The plate coil heater measures 22 3/4 inch diameter and 8 1/2 inches wide for use with a 55 gallon steel drum, with a maximum operating pressure of 150 psig. Ideal for use in hazardous areas Use with steam, water, hot oil, heat transfer liquids or refrigerant Note: If you need to use this unit with a 55 gallon open-head drum you must provide a manufacture spec sheet to assume proper fit.

    SPEC:
  • Container Size: 55 gallon
  • Description: Hinged Section Style
  • Wt.: 65 lbs.

    • Q & A's

    Questions & Answers about Carbon Steel, Heat or Cool 55 Gallon Drums, 3

    Ask a question about Carbon Steel, Heat or Cool 55 Gallon Drums, 3. Click here
    Scroll to top